Skip to content

RDF

rdf computes the radial distribution function between a center species and a neighbor species, together with a coordination number.

mliport analyze runs/md rdf --center Li --neighbor S --rmax 6.0 --bins 200

Both species are required. For LGPS the useful pairs are Li–Li, Li–S and P–S.

Options you will use

Option Meaning
--center SPECIES, --neighbor SPECIES the pair (both required)
--rmax maximum radius in Å
--bins histogram bins (default 200)
--cn-cutoff the cutoff in Å used for the coordination number
--stride use every Nth frame (default 1)
--start-frame, --stop-frame, --include-equilibration the analysis window
--positions-convention, --frame-interval-fs metadata for external trajectories

--start-frame, --stop-frame and --stride keep the cost down on long trajectories:

.venv-grace/bin/mliport analyze results/lgps-1ns rdf \
  --center Li --neighbor S --start-frame 0 --stop-frame 2000 --stride 5

What comes out

The partial RDF, the coordination number and CSV, PNG and SVG artifacts under <run>/analysis/rdf/<analysis-id>/. An unknown species, or too few valid frames, fails closed, and an external trajectory needs its coordinate convention stated.

Reading it

An RDF is a structural average, not a bond definition. Report the cutoff you used for the coordination number and the window you averaged over. A single snapshot is a diagnostic; a converged RDF needs enough frames and a homogeneous cell.

mliport analyze runs/md-800K rdf --center Li --neighbor O \
  --rmax 8 --bins 240 --cn-cutoff 3.0 --stride 5